Ramco Hard Worker Tile Grout HW210

Ramco Hard Worker Tile Grout (HW210) is a high-quality, polymer-modified, cement-based grout designed to fill the joints between ceramic, vitrified, marble, and stone tiles. Unlike ordinary white cement, HW210 is engineered to be non-shrink, water-resistant, and aesthetically versatile, ensuring that your tile joints remain intact and beautiful for years.

Available in a wide range of colors, it is the perfect finishing touch for both residential and commercial flooring and wall applications.

Key Features & Benefits

• Non-Shrink & Crack-Resistant: Specialized additives ensure that the grout does not shrink as it cures, preventing the formation of hair-line cracks in the joints.
• Superior Color Consistency: Formulated with high-grade pigments that are UV-resistant, ensuring the color of your tile joints stays uniform and does not fade over time.
• Excellent Water Resistance: The polymer-modified formula creates a dense, low-permeability joint that resists water penetration, making it ideal for wet areas like bathrooms and kitchens.
• High Bond Strength: It adheres firmly to the edges of the tiles, creating a monolithic surface that prevents the tiles from chipping at the corners.
• Easy to Clean: Once fully cured, the smooth finish of the grout allows for easy maintenance and resists the accumulation of dirt and grime.
• Wide Joint Compatibility: Perfectly suited for joint widths ranging from 1 mm to 6 mm.

Primary Applications

• Internal & External Tiling: Suitable for all types of floor and wall tiles in living rooms, bedrooms, and balconies.
• Wet Areas: Highly recommended for bathroom walls, kitchen backsplashes, and utility areas.
• Commercial Spaces: Ideal for office floors, showrooms, and hotel lobbies where aesthetic finish and durability are required.
• Natural Stone Joints: Excellent for filling gaps in marble, granite, and sandstone flooring.

Application Guide

1. Preparation: Ensure that the tile adhesive is fully cured (usually 24 hours after tiling). The joints must be clean, dry, and free from loose mortar or dust.
2. Mixing: Mix HW210 with clean water in a clean container. Stir thoroughly until a smooth, lump-free, paste-like consistency is achieved. Let it sit for 5 minutes, then remix briefly.
3. Application: Apply the grout into the joints using a rubber grout float. Press firmly to ensure the joints are completely filled from bottom to top.
4. Finishing: After approximately 15–20 minutes (when the grout starts to set), wipe off the excess material from the tile surface using a damp (not dripping) sponge.
5. Final Polish: Once the grout is dry, buff the tiles with a clean, dry cloth to remove any remaining haze.

Why Choose HW210 for Your Home?

Ordinary white cement often turns yellow, cracks, and falls out of the joints within a year. Ramco Hard Worker HW210 provides a flexible yet hard-wearing joint that complements the color of your tiles while acting as a barrier against moisture and dust.